237
Examples
# Display the automatic reboot schedule.
<Sysname> display scheduler reboot
System will reboot at 16:32:00 05/23/2015 (in 1 hours and 39 minutes).
Related commands
scheduler reboot at
scheduler reboot delay
display scheduler schedule
Use display scheduler schedule to display schedule information.
Syntax
display scheduler schedule [ schedule-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
schedule-name: Specifies a schedule by its name, a case-sensitive string of 1 to 47 characters. If
you do not specify a schedule, this command displays information about all schedules.
Examples
# Display information about all schedules.
<Sysname> display scheduler schedule
Schedule name : shutdown
Schedule type : Run once after 0 hours 2 minutes
Start time : Tue Dec 27 10:44:42 2015
Last execution time : Tue Dec 27 10:44:42 2015
Last completion time : Tue Dec 27 10:44:47 2015
Execution counts : 1
-----------------------------------------------------------------------
Job name Last execution status
shutdown Successful
Table 41 Command output
Field Description
Schedule type
Execution time setting of the schedule. If no execution time is specified, this field is not
displayed.
Start time
Time to execute the schedule for the first time. If no execution time is specified, this
field is not displayed.
Last execution
time
Last time when the schedule was executed. If no execution time is specified, this field
is not displayed. If the schedule has never been executed, "Yet to be executed" is
displayed for this field.
Last completion
time
Last time when the schedule was completed. If no execution time is specified, this field
is not displayed.
To Next Page
Loading...
Need help?
General