169
#
vlan 1
#
domain system
#
---- More ----
Related commands
reset saved-configuration
save
display startup
Use display startup to display the names of the current startup configuration file and the
next-startup configuration files.
Syntax
display startup
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
All IRF members use the same current startup configuration file as the master.
After a master/subordinate switchover, it is normal that the current startup configuration files on all
IRF members are displayed as NULL. This is because the new master continues to run with the
running configuration rather than rebooting with a startup configuration file.
Examples
# Display names of the startup configuration files.
<Sysname> display startup
Current startup saved-configuration file: flash:/startup.cfg
Next main startup saved-configuration file: flash:/startup.cfg
Next backup startup saved-configuration file: NULL
Table 24 Command output
Field Description
Current startup saved-configuration file Configuration file that the device has started up with.
Next main startup saved-configuration file Primary configuration file to be used at the next startup.
Next backup startup saved-configuration file Backup configuration file to be used at the next startup.
Related commands
startup saved-configuration
To Next Page
Loading...
