HPE FlexFabric 5940 SERIES

181
ISSU commands
display install active
Use display install active to display active software images.
Syntax
display install active [ slot slot-number ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information for all IRF members.
verbose: Displays detailed information. If you do not specify this keyword, the command displays
only image names.
Examples
# Display active software images.
<Sysname> display install active
Active packages on slot 1:
flash:/boot.bin
flash:/system.bin
flash:/feature1.bin
# Display detailed information about active software images.
<Sysname> display install active verbose
Active packages on slot 1:
flash:/boot.bin
[Package]
Vendor: HPE
Product: 5940
Service name: boot
Platform version: 7.1.070
Product version: Test 0001015
Supported board: mpu
[Component]
Component: boot
Description: boot package
flash:/system.bin
[Package]
Vendor: HPE
Product: 5940
Service name: system