223
1% in last 5 minutes
# Display the current CPU usage statistics in table form.
<Sysname> display cpu-usage
Slot CPU Last 5 sec Last 1 min Last 5 min
1 0 17% 29% 28%
Table 35 Command output
Field Description
x% in last 5 seconds
Last 5 sec
Average CPU usage during the most recent 5-second interval.
y% in last 1 minute
Last 1 min
Average CPU usage during the most recent 1-minute interval.
z% in last 5 minutes
Last 5 min
Average CPU usage during the most recent 5-minute interval.
display cpu-usage configuration
Use display cpu-usage configuration to display CPU usage monitoring settings.
Syntax
display cpu-usage configuration [ slot slot-number [ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays the CPU usage monitoring settings for the master device.
cpu cpu-number: Specifies a CPU by its number.
Examples
# Display the CPU usage monitoring settings.
<Sysname> display cpu-usage configuration
CPU usage monitor is enabled.
Current monitor interval is 60 seconds.
Current monitor threshold is 90%.
Related commands
monitor cpu-usage enable
monitor cpu-usage interval
monitor cpu-usage threshold
display cpu-usage history
Use display cpu-usage history to display the historical CPU usage statistics in a coordinate
system.
To Next Page
Loading...
Need help?
General