HPE FlexFabric 5940 SERIES Fundamentals Command Reference

160
The settings you made during the commit delay interval are automatically removed if you have not
manually committed them before the configuration commit delay timer expires.
As a best practice, configure the information center to output logs to the console. Use the logs to
determine whether you want to commit the settings. For more information about the information
center, see Network Management and Monitoring Configuration Guide.
Examples
# Set the configuration commit delay timer to 10 minutes.
<Sysname> system-view
[Sysname] configuration commit delay 10
# Commit the settings configured after the configuration commit delay timer was set and before the
delay timer expires.
[Sysname] configuration commit
# Commit the settings after the configuration commit delay timer has expired. The commit operation
will fail and the system will roll back the configuration.
[Sysname] configuration commit
The system is rolling back configuration. Please wait…
configuration commit delay
Use configuration commit delay to start the configuration commit delay timer.
Syntax
configuration commit delay delay-time
Views
System view
Predefined user roles
network-admin
Parameters
delay-time: Sets the configuration commit delay interval. The value range is 1 to 65535 minutes.
Usage guidelines
The configuration commit delay feature automatically removes the settings you made during the
commit delay interval if you have not manually committed them before the configuration commit
delay timer expires.
This feature prevents a misconfiguration from causing the inability to access the device and is
especially useful when you configure the device remotely.
You can reconfigure the configuration commit delay timer before it expires to shorten or extend the
commit delay interval. The settings made during the delay interval will be removed if you have not
committed them before the new timer expires.
When you use this feature, follow these restrictions and guidelines:
• In a multi-user context, make sure no one else is configuring the device.
• You cannot perform any operations during the configuration rollback.
• The configuration commit delay feature is a one-time setting. The feature is disabled when the
commit delay timer expires or after a manual commit operation is performed.
Examples
# Set the configuration commit delay timer to 10 minutes.
<Sysname> system-view

HPE FlexFabric 5940 SERIES Specifications

General

Brand	HPE
Model	FlexFabric 5940 SERIES
Category	Switch
Language	English