75
Press CTRL+K to abort
Connected to 192.168.1.241 ...
******************************************************************************
* Copyright (c) 2010-2017 Hewlett Packard Enterprise Development LP *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
<Server>
You are logged in without authentication.
2. Display online CLI user information.
<Server> display users
Idx Line Idle Time Pid Type
+ 50 VTY 0 00:00:00 Jan 17 15:29:27 189 TEL
Following are more details.
VTY 0 :
Location: 192.168.1.186
+ : Current operation user.
F : Current operation user works in async mode.
The output shows that you are using VTY 0. The configuration in user line view is effective.
Related commands
authentication-mode
restful http enable
Use restful http enable to enable RESTful access over HTTP.
Use undo restful http enable to disable RESTful access over HTTP.
Syntax
restful http enable
undo restful http enable
Default
RESTful access over HTTP is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command is not supported in FIPS mode.
For users to access the device through the HTTP-based RESTful API, you must enable RESTful
access over HTTP.
Examples
# Enable RESTful access over HTTP.
To Next Page
Loading...
Need help?
General