HPE FlexFabric 5940 SERIES

182
Platform version: 7.1.070
Product version: Test 0001015
Supported board: mpu
[Component]
Component: system
Description: system package
flash:/feature1.bin
[Package]
Vendor: HPE
Product: 5940
Service name: test
Platform version: 7.1.070
Product version: Test 0001015
Supported board: mpu
[Component]
Component: test
Description: test package
Table 26 Command output
Field Description
[Package] Detailed information about the software image.
Service name
Image type:
• boot—Boot image.
• system—System image.
• boot patch—Patch image for the boot image.
• system patch—Patch image for the system image.
• Any other value indicates a feature image.
Supported board
Hardware types supported by the software image:
mpu
—Member device.
[Component] Information about components included in the image file.
Related commands
install active
display install backup
Use display install backup to display backup startup software images.
Syntax
display install backup [ slot slot-number ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator