190
Syntax
display install rollback [ point-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
point-id: Specifies a rollback point ID. If you do not specify a rollback point ID, the command displays
all rollback points.
Usage guidelines
Use this command to identify available rollback points during an ISSU that uses install commands.
The system does not record rollback points during an ISSU that uses issu commands.
Examples
# Display all rollback points.
<Sysname> display install rollback
Install rollback information 1 on slot 1:
Updating from flash:/route-1.bin
to flash:/route-2.bin.
Install rollback information 2 on slot 1:
Deactivating flash:/route-2.bin
The output shows that the device has two rollback points.
• At rollback point 1, flash:/route-1.bin was upgraded to flash:/route-2.bin.
• At rollback point 2, flash:/route-2.bin was deactivated.
Related commands
install rollback
reset install rollback oldest
display install which
Use display install which to display all software image files that include a specific component or
file.
Syntax
display install which { component name | file filename } [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
component name: Specifies a component name.
To Next Page
Loading...
Need help?
General