232
<Sysname> display hardware-resource switch-mode
Switch-mode resource(switch-mode), all supported modes:
0 0 MAC table is 288K, L3 host table is 16K, LPM Table is 16K
1 1 MAC table is 224K, L3 host table is 80K, LPM Table is 16K
2 2 MAC table is 160K, L3 host table is 144K, LPM Table is 16K
3 3 MAC table is 96K, L3 host table is 208K, LPM Table is 16K
4 4 MAC table is 32K, L3 host table is 16K, LPM Table is 128K
-----------------------------------------------
Default Current Next
0 0 1
For information about the hardware resource modes and the table capacities, see Fundamentals
Configuration Guide.
Related commands
hardware-resource routing-mode (Layer 3—IP Routing Command Reference)
hardware-resource switch-mode
display memory
Use display memory to display memory usage information.
Syntax
display memory [ summary ] [ slot slot-number [ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
summary: Displays brief information about memory usage. If you do not specify this keyword, the
command displays detailed information about memory usage.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays memory usage for all member devices.
cpu cpu-number: Specifies a CPU by its number.
Examples
# Display detailed memory usage information.
<Sysname> display memory
Memory statistics are measured in KB:
Slot 1:
Total Used Free Shared Buffers Cached FreeRatio
Mem: 3293028 1129928 2163100 0 1104 263004 65.7%
-/+ Buffers/Cache: 865820 2427208
Swap: 0 0 0
# Display brief memory usage information.
<Sysname> display memory summary
Memory statistics are measured in KB:
To Next Page
Loading...
Need help?
General