53
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display HTTPS service configuration and status information.
<Sysname> display ip https
HTTPS port: 443
SSL server policy: test
Certificate access control policy: Not configured
Basic ACL: 2222
HTTPS status: Enabled
Table 8 Command output
Field Description
HTTPS port HTTPS service port number.
SSL server policy
SSL server policy applied to the HTTPS service. If no SSL server policy
is applied, this field displays
Not configured
.
Certificate access-control-policy
Certificate-based access control policy used to control client access
rights. If no certificate-based access control policy is used, this field
displays
Not configured
.
Basic ACL
ACL used to control HTTPS access. If no ACL is used, this field
displays
0
.
HTTPS status Whether the HTTPS service is enabled.
Related commands
ip https acl
ip https certificate access-control-policy
ip https enable
ip https port
ip https ssl-server-policy
display line
Use display line to display user line information.
Syntax
display line [ number1 | { aux | vty } number2 ] [ summary ]
Views
Any view
Predefined user roles
network-admin
network-operator
To Next Page
Loading...
Need help?
General