213
Field Description
Switchover Way
Switchover method:
• Active standby process switchover—Switch from the active process to the
standby process.
• Master subordinate switchover—Switch from the master to a subordinate
member.
For more information about the command output, see Table 30.
Related commands
issu load
reset install log-history oldest
Use reset install log-history oldest to clear ISSU log entries.
Syntax
reset install log-history oldest log-number
Views
User view
Predefined user roles
network-admin
Parameters
log-number: Specifies the number of ISSU log entries to be deleted.
Usage guidelines
This command clears the specified number of log entries, beginning with the oldest log entry.
Examples
# Clear the two oldest ISSU log entries.
<Sysname> reset install log-history oldest 2
Related commands
display install log
reset install rollback oldest
Use reset install rollback oldest to clear ISSU rollback points.
Syntax
reset install rollback oldest point-id
Views
User view
Predefined user roles
network-admin
Parameters
point-id: Specifies a rollback point by its ID.
To Next Page
Loading...
