200
Field Description
New Version Version number of the new software.
Upgrade Way
ISSU methods:
• Service Upgrade.
• File Upgrade.
• Reboot.
This field is displayed only for an upgrade to a compatible version.
For more information about ISSU methods, see Fundamentals
Configuration Guide.
Influenced service according
to following table
Services influenced by the upgrade.
Related commands
display install active
install commit
install deactivate
install add
Use install add to decompress an .ipe file.
Syntax
install add ipe-filename filesystem
Views
User view
Predefined user roles
network-admin
Parameters
ipe-filename: Specifies an .ipe file in the filesystemname/filename.ipe format. The file must be stored
in the root directory of a file system on the device. The value string excluding the file system location
section (if any) can have a maximum of 63 characters. For more information about specifying a file,
see file system management in Fundamentals Configuration Guide.
filesystem: Specifies the destination file system for the software images, in the filesystemname
format.
Usage guidelines
To use the install activate command to activate software images, you must use .bin image files. If
the upgrade file is an .ipe file, use this command to decompress the .ipe file before you start the
upgrade.
To identify software images that are included in an .ipe file, use the display install ipe-info
command.
Examples
# Decompress all.ipe to the flash memory.
<Sysname> install add flash:/all.ipe flash:
Verifying the file flash:/all.ipe on slot 1...Done.
Decompressing file boot.bin to flash:/boot.bin.......................Done.
Decompressing file system.bin to flash:/system.bin..........................Done.
To Next Page
Loading...
Need help?
General