220
Related commands
scheduler job
copyright-info enable
Use copyright-info enable to enable copyright statement display.
Use undo copyright-info enable to disable copyright statement display.
Syntax
copyright-info enable
undo copyright-info enable
Default
Copyright statement display is enabled.
Views
System view
Predefined user roles
network-admin
Examples
# Enable copyright statement display.
<Sysname> system-view
[Sysname] copyright-info enable
The device will display the following statement when a user logs in:
******************************************************************************
* Copyright (c) 2010-2017 Hewlett Packard Enterprise Development LP *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
display alarm
Use display alarm to display alarm information.
Syntax
display alarm [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays alarm information for all IRF member devices.
Examples
# Display alarm information.