238
Field Description
Execution counts
Number of times the schedule has been executed. If the schedule has never been
executed, this field is not displayed.
Job name Name of a job under the schedule.
Last execution
status
Result of the most recent execution:
• Successful.
• Failed.
• Waiting—The device is executing the schedule and the job is waiting to be
executed.
• In process—The job is being executed.
• -NA-—The execution time has not arrived yet.
To view information about whether the commands in the job has been executed and
the execution results, execute the
display scheduler logfile
command.
display system stable state
Use display system stable state to display system stability and status information.
Syntax
display system stable state
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
Before performing an ISSU or a switchover, execute this command multiple times to identify whether
the system is operating stably. If the value of the System State field is not Stable, you cannot
perform an ISSU. If the value of the Redundancy Stable field is not Stable, you cannot perform an
active/standby switchover.
The device startup process takes some time. If the values of the status fields do not change to
Stable, execute this command multiple times to identify the devices that are not in Stable state. You
can also use other commands to identify the faulty components. For example:
• Use the display device command to identify the device operating status.
• Use the display ha service-group command to display the status of HA service groups and
identify the groups in batch backup state.
• Use the display system internal process state command in probe view to display service
operating status.
Examples
# Display system stability and status information.
<Sysname> display system stable state
System state : Stable
Redundancy state: Stable
Slot CPU Role State
1 0 Active Stable
To Next Page
Loading...
