HPE FlexFabric 5940 SERIES Fundamentals Command Reference

180
display boot-loader
Use display boot-loader to display current software images and startup software images.
Syntax
display boot-loader [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies the member ID of an IRF member device. If you do not specify a member
device, this command displays the software images on each IRF member device.
Examples
# Display the current software images and startup software images.
<Sysname> display boot-loader
Software images on slot 1:
Current software images:
flash:/boot.bin
flash:/system.bin
Main startup software images:
flash:/boot.bin
flash:/system.bin
Backup startup software images:
flash:/boot.bin
flash:/system.bin
Table 25 Command output
Field Description
Current software images Comware images that have been loaded.
Main startup software images Primary Comware images for the next startup.
Backup startup software images Backup Comware images for the next startup.
Related commands
boot-loader file

HPE FlexFabric 5940 SERIES Specifications

General

Brand	HPE
Model	FlexFabric 5940 SERIES
Category	Switch
Language	English