236
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display job execution log information.
<Sysname> display scheduler logfile
Logfile Size: 1902 Bytes.
Job name : shutdown
Schedule name : shutdown
Execution time : Tue Dec 27 10:44:42 2015
Completion time : Tue Dec 27 10:44:47 2015
--------------------------------- Job output -----------------------------------
<Sysname>system-view
System View: return to User View with Ctrl+Z.
[Sysname]interface rang ten-gigabitethernet 1/0/1 to ten-gigabitethernet 1/0/3
[Sysname-if-range]shutdown
Table 40 Command output
Field Description
Logfile Size Size of the log file, in bytes.
Schedule name Schedule to which the job belongs.
Execution time Time when the job was started.
Completion time
Time when the job was completed. If the job has never been executed or the job does
not have any commands, this field is blank.
Job output Commands in the job and their output.
Related commands
reset scheduler logfile
display scheduler reboot
Use display scheduler reboot to display the automatic reboot schedule.
Syntax
display scheduler reboot
Views
Any view
Predefined user roles
network-admin
network-operator
To Next Page
Loading...
