119
Predefined user roles
network-admin
Parameters
oldfilename: Specifies the original file name.
newfilename: Specifies the new file name.
Usage guidelines
You can perform this operation only after you log in to the FTP server.
Examples
# Rename the a.txt file as b.txt.
• Method 1:
ftp> rename
(from-name) a.txt
(to-name) b.txt
350 RNFR accepted - file exists, ready for destination
250 File successfully renamed or moved
• Method 2:
ftp> rename a.txt
(to-name) b.txt
350 RNFR accepted - file exists, ready for destination
250 File successfully renamed or moved
• Method 3:
ftp> rename a.txt b.txt
350 RNFR accepted - file exists, ready for destination
250 File successfully renamed or moved
reset
Use reset to clear the reply information received from the FTP server in the buffer.
Syntax
reset
Views
FTP client view
Predefined user roles
network-admin
Examples
# Clear the reply information received from the FTP server.
ftp> reset
restart
Use restart to specify the file retransmission offset.
Syntax
restart marker
To Next Page
Loading...
