61
Syntax
free user-interface { number1 | { aux | vty } number2 }
Views
User view
Predefined user roles
network-admin
Parameters
number1: Specifies the absolute number of a user line. The value range is 0 to 73.
aux: Specifies the AUX line.
vty: Specifies the VTY line.
number2: Specifies the relative number of a user line. The value range is 0 to 9 for AUX lines and 0 to
63 for VTY lines.
Usage guidelines
This command does not release the line you are using.
This command is an older version reserved for backward compatibility purposes. It has the same
functionality and output as the free line command. As a best practice, use the free line command.
Examples
# Release VTY line 1.
<Sysname> free user-interface vty 1
Are you sure to free line vty1? [Y/N]:y
[OK]
history-command max-size
Use history-command max-size to set the size of the command history buffer for a user line.
Use undo history-command max-size to restore the default.
Syntax
history-command max-size size-value
undo history-command max-size
Default
The command history buffer for a user line stores up to 10 history commands.
Views
User line view
User line class view
Predefined user roles
network-admin
Parameters
size-value: Specifies the maximum number of history commands the buffer can store, in the range of
0 to 256.
To Next Page
Loading...
Need help?
General