197
Table 30 Command output
Field Description
Verifying the file The system was verifying the validity of the file.
Version compatibility list
• Under a system image, this field shows all system image versions that
are compatible with the system image.
• Under a feature image, this field shows all feature image versions that
are compatible with the feature image.
Version dependency boot list
Boot image versions that support the system image. To install the system
image, you must install one of the boot image versions that are in the list.
Version dependency system
list
System image versions that support the feature image. To install the feature
image, you must install one of the system image versions that is in the list.
Influenced service according
to following table
Services that will be affected by the upgrade.
This field is displayed only for compatible versions.
Incompatible upgrade You are upgrading the software to an incompatible version.
Upgrade Way
ISSU method:
• Service Upgrade.
• File Upgrade.
• Reboot.
This field is displayed only for compatible versions.
For more information about ISSU methods, see Fundamentals
Configuration Guide.
Related commands
issu load
install abort
Use install abort to abort an ongoing activate or deactivate operation.
Syntax
install abort [ job-id ]
Views
User view
Predefined user roles
network-admin
Parameters
job-id: Specifies the job ID of an ISSU operation. If you do not specify this argument, the command
aborts all ongoing software image activate and deactivate operations.
Usage guidelines
The system creates a software image management job each time you use the install activate,
install add, install commit, install deactivate, install remove, or install rollback to command.
Each job represents one command and is assigned a unique job ID. To obtain the ID of a job, use the
display install job command.
When you abort an ongoing activate or deactivate operation, the system rolls back to the status it
was in before the operation was started.
To Next Page
Loading...
