158
Default
The maximum number is 5.
Views
System view
Predefined user roles
network-admin
Parameters
file-number: Specifies the maximum number of configuration archives that can be saved. The value
range is 1 to 10. Adjust the setting depending on the amount of storage space available.
Usage guidelines
Before you can set a limit on configuration archives, use the archive configuration location
command to specify a configuration archive directory and archive file name prefix.
After the maximum number of configuration archives is reached, the system deletes the oldest
archive for the new archive.
Changing the limit setting to a lower value does not cause immediate deletion of excess archives.
Instead, the configuration archive feature deletes the oldest n files when a new archive is manually or
automatically saved, where n = current archive count – new archive limit + 1. For example, seven
configuration archives have been saved before the archive limit is set to four. When saving a new
configuration archive, the system first deletes the oldest four (7 – 4 + 1) archives.
If you execute the undo archive configuration location command, the default archive limit is
restored.
Examples
# Set the maximum number of configuration archives to 10.
<Sysname> system-view
[Sysname] archive configuration max 10
Related commands
archive configuration
archive configuration location
archive configuration interval
display archive configuration
backup startup-configuration
Use backup startup-configuration to back up the main next-startup configuration file to a TFTP
server.
Syntax
backup startup-configuration to { ipv4-server | ipv6 ipv6-server } [ dest-filename ] [ vpn-instance
vpn-instance-name ]
Views
User view
Predefined user roles
network-admin
To Next Page
Loading...
Need help?
General