235
power-id: Specifies a power supply by its ID. If you do not specify a power supply, this command
displays information about all power supplies at the specified position.
Examples
# Display power supply information.
<Sysname> display power
Slot 9:
Input Power: 136(W)
PowerID State Mode Current(A) Voltage(V) Power(W)
1 Fault AC -- -- --
2 Normal AC -- -- --
display scheduler job
Use display scheduler job to display job configuration information.
Syntax
display scheduler job [ job-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
job-name: Specifies a job by its name, a case-sensitive string of 1 to 47 characters. If you do not
specify a job, this command displays configuration information for all jobs.
Examples
# Display configuration information for all jobs.
<Sysname> display scheduler job
Job name: saveconfig
copy startup.cfg backup.cfg
Job name: backupconfig
Job name: creat-VLAN100
system-view
vlan 100
// The output shows that the device has three jobs: the first has one command, the second does not
have any commands, and the third has two commands. Jobs are separated by blank lines.
display scheduler logfile
Use display scheduler logfile to display job execution log information.
Syntax
display scheduler logfile
To Next Page
Loading...
Need help?
General