HPE FlexFabric 5940 SERIES Fundamentals Command Reference

183
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information for all IRF members.
verbose: Displays detailed information. If you do not specify this keyword, the command displays
only image names.
Usage guidelines
Backup startup images are used only when the main boot or system image is missing or corrupt. For
more information, see Fundamental Configuration Guide.
To modify the backup startup image list, use the boot-loader file command.
Examples
# Display the backup startup software images.
<Sysname> display install backup
Backup startup software images on slot 1:
flash:/boot.bin
flash:/system.bin
# Display detailed information about backup startup software images.
<Sysname> display install backup verbose
Backup startup software images on slot 1:
flash:/boot.bin
[Package]
Vendor: HPE
Product: 5940
Service name: boot
Platform version: 7.1.070
Product version: Test 0001015
Supported board: mpu
[Component]
Component: boot
Description: boot package
flash:/system.bin
[Package]
Vendor: HPE
Product: 5940
Service name: system
Platform version: 7.1.070
Product version: Test 0001015
Supported board: mpu
[Component]
Component: system
Description: system package
For information about the command output, see Table 26.
Related commands
boot-loader file
display install committed

HPE FlexFabric 5940 SERIES Specifications

General

Brand	HPE
Model	FlexFabric 5940 SERIES
Category	Switch
Language	English