HPE FlexFabric 5940 SERIES

94
Parameters
username: Specifies a username. To display online FTP users, execute the display ftp-user
command.
Examples
# Release the FTP connections established by using user account ftpuser.
<Sysname> free ftp user ftpuser
Are you sure to free FTP connection? [Y/N]:y
<Sysname>
free ftp user-ip
Use free ftp user-ip to manually release the FTP connections established from a specific IPv4
address.
Syntax
free ftp user-ip ip-address [ port port ]
Views
User view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the source IP address of an FTP connection. To view the source IP addresses
of FTP connections, execute the display ftp-user command.
port port: Specifies the source port of an FTP connection. To view the source ports of FTP
connections, execute the display ftp-user command.
Examples
# Release the FTP connections established from the IP address 192.168.20.184.
<Sysname> free ftp user-ip 192.168.20.184
Are you sure to free FTP connection? [Y/N]:y
<Sysname>
free ftp user-ip ipv6
Use free ftp user-ip ipv6 to manually release the FTP connections established from a specific IPv6
address.
Syntax
free ftp user-ip ipv6 ipv6-address [ port port ]
Views
User view
Predefined user roles
network-admin
Parameters
ipv6-address: Specifies the source IPv6 address of an FTP connection. To view the source IPv6
addresses of FTP connections, execute the display ftp-user command.