HPE FlexFabric 5940 SERIES Fundamentals Command Reference

171
Usage guidelines
CAUTION:
This command permanently deletes the specified next-startup configuration file. In an IRF fabric, this
command deletes the specified file from all IRF member devices.
You can delete the main file, the backup file, or both.
To delete a file that is set as both main and backup next-startup configuration files, you must execute
both the reset saved-configuration backup command and the reset saved-configuration main
command. Using only one of the commands sets the target file attribute to NULL instead of deleting
the file.
If you do not specify a configuration file attribute, the reset saved-configuration command deletes
the main next-startup configuration file.
Examples
# Delete the main next-startup configuration file.
<Sysname> reset saved-configuration
The saved configuration file will be erased. Are you sure? [Y/N]:y
Configuration file in flash: is being cleared.
Please wait ...........
Configuration file is cleared.
Related commands
display saved-configuration
restore startup-configuration
Use restore startup-configuration to download a configuration file from a TFTP server and specify
it as the main next-startup configuration file.
Syntax
restore startup-configuration from { ipv4-server | ipv6 ipv6-server } src-filename [ vpn-instance
vpn-instance-name ]
Views
User view
Predefined user roles
network-admin
Parameters
ipv4-server: Specifies a TFTP server by its IPv4 address or host name. The host name is a
case-insensitive string of 1 to 253 characters. Valid characters include letters, digits, hyphens (-),
underscores (_), and dots (.).
ipv6 ipv6-server: Specifies a TFTP server by its IPv6 address or host name. The host name is a
case-insensitive string of 1 to 253 characters. Valid characters include letters, digits, hyphens (-),
underscores (_), and dots (.).
src-filename: Specifies the name of the configuration file to be downloaded. The file name must use
the .cfg extension. Excluding the .cfg extension, the file name is a string of 1 to 255 characters.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. If the TFTP server is on the public network, do not specify
this option.

HPE FlexFabric 5940 SERIES Specifications

General

Brand	HPE
Model	FlexFabric 5940 SERIES
Category	Switch
Language	English