HPE FlexFabric 5940 SERIES Fundamentals Command Reference

126
Parameters
username: Specifies the username.
password: Specifies the password.
Usage guidelines
If you tried to access an FTP server but failed to pass the authentication, you can use this command
to try again before the connection to the FTP server expires.
After you log in to an FTP server, you can initiate an FTP authentication to change to a new account.
By changing to a new account, you can get a different privilege without re-establishing the FTP
connection.
Make sure the specified username and password have been configured on the FTP server. If the
username or password is not configured, this command fails and the FTP connection is closed.
Examples
# After logging in to the FTP server, use username ftp and password 123456 to log in again to the
FTP server.
• Method 1:
ftp> user ftp 123456
331 Password required for ftp.
230 User logged in.
• Method 2:
ftp> user ftp
331 Password required for ftp.
Password:
230 User logged in.
verbose
Use verbose to enable or disable the device to display detailed information about FTP operations.
Syntax
verbose
Default
The device displays detailed information about FTP operations.
Views
FTP client view
Predefined user roles
network-admin
Usage guidelines
This command affects only the current FTP session.
Examples
# Disable the device from displaying detailed information about FTP operations.
ftp> verbose
Verbose mode off.
# Execute the get command.
ftp> get a.cfg 1.cfg

HPE FlexFabric 5940 SERIES Specifications

General

Brand	HPE
Model	FlexFabric 5940 SERIES
Category	Switch
Language	English