202
Parameters
feature: Specifies a space-separated list of up to 30 feature image files.
patch: Specifies a space-separated list of up to 30 patch image files.
filename: Specifies a .bin file in the filesystemname/filename.bin format. The value string can have a
maximum of 63 characters. The file system name cannot contain file system location information.
For more information about specifying a file, see file system management in Fundamentals
Configuration Guide.
all: Specifies all member devices on which the specified patch image file has been activated.
slot slot-number: Specifies an IRF member device by its member ID.
Usage guidelines
At reboot, a subordinate device automatically synchronizes the master device's configuration and
status data. You must wait for the synchronization to complete before using the install deactivate
command on the subordinate device. To identify whether the synchronization is complete, use the
display system stable state command. The synchronization is complete if the System State field
displays Stable.
You can deactivate only active feature and patch images.
Images deactivated by using the install deactivate patch filename all command do not run after a
reboot. To prevent other deactivated images from running after a reboot, you must commit the
software change by using the install commit command.
Examples
# Deactivate the patch images in the route-patch.bin file for a slot.
<Sysname> install deactivate patch flash:/route-patch.bin slot 1
This operation might take several minutes, please wait...Done.
Related commands
display install active
display install inactive
install remove
Use install remove to delete an inactive software image file.
Syntax
install remove [ slot slot-number ] { filename | inactive }
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command deletes inactive software images from all IRF members.
filename: Specifies a .bin file in the filesystemname/filename.bin format. The value string can have a
maximum of 63 characters. The file must be stored in the root directory of a file system on the device.
The file system name cannot contain file system location information. For more information about
specifying a file, see file system management in Fundamentals Configuration Guide.
inactive: Deletes all inactive software image files in the root directories of the specified file systems.
To Next Page
Loading...
