257
Use undo scheduler schedule to delete a schedule.
Syntax
scheduler schedule schedule-name
undo scheduler schedule schedule-name
Default
No schedule exists.
Views
System view
Predefined user roles
network-admin
Parameters
schedule-name: Specifies the schedule name, a case-sensitive string of 1 to 47 characters.
Usage guidelines
You can configure a schedule to have the device automatically run a command or a set of commands
without administrative interference.
To configure a schedule:
1. Use the scheduler job command to create a job and enter job view.
2. Use the command command to assign commands to the job.
3. Use the scheduler schedule command to create a schedule and enter schedule view.
4. Use the job command to assign the job to the schedule. You can assign multiple jobs to a
schedule. The jobs must already exist.
5. Use the user-role command to assign user roles to the schedule. You can assign up to 64 user
roles to a schedule.
6. Use the time at, time once, or time repeating command to specify an execution time for the
schedule. You can specify only one execution time for a schedule.
Examples
# Create a schedule named saveconfig.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
Related commands
job
time at
time once
shutdown-interval
Use shutdown-interval to set the port status detection timer.
Use undo shutdown-interval to restore the default.
Syntax
shutdown-interval interval
undo shutdown-interval
To Next Page
Loading...
Need help?
General