98
ssl server-policy (Security Command Reference)
ftp timeout
Use ftp timeout to set the FTP connection idle-timeout timer.
Use undo ftp timeout to restore the default.
Syntax
ftp timeout minute
undo ftp timeout
Default
The FTP connection idle-timeout timer is 30 minutes.
Views
System view
Predefined user roles
network-admin
Parameters
Minute: Specifies a time interval in the range of 1 to 35791 minutes.
Usage guidelines
If no data transfer occurs on an FTP connection within the idle-timeout interval, the FTP server
closes the FTP connection to release resources.
Examples
# Set the FTP connection idle-timeout timer to 36 minutes.
<Sysname> system-view
[Sysname] ftp timeout 36
FTP client commands
For FTP users to execute FTP client configuration commands, you must configure authorization
settings for users on the FTP server. Authorized operations include viewing the files in the working
directory, reading/downloading/uploading/renaming/removing files, and creating directories.
The FTP client commands in this section are supported by the device, but whether they can be
executed successfully depends on the FTP server.
The output in the examples of this section varies by FTP server type.
?
Use ? to display all commands supported by an FTP client.
Use ? command-name to display the help information for a command.
Syntax
? [ command-name ]
Views
FTP client view
To Next Page
Loading...
