HPE FlexFabric 5940 SERIES Fundamentals Command Reference

186
Examples
# Display brief information about inactive software images in the root directories of the file systems.
<Sysname> display install inactive
Inactive packages on slot 1:
flash:/feature1.bin
# Display detailed information about inactive software images in the root directories of the file
systems.
<Sysname> display install inactive verbose
Inactive packages on slot 1:
flash:/feature1.bin
[Package]
Vendor: HPE
Product: 5940
Service name: feature1
Platform version: 7.1.070
Product version: Test 0001015
Supported board: mpu
[Component]
Component: feature1
Description: feature1 package
For information about the command output, see Table 26.
Related commands
install deactivate
display install ipe-info
Use display install ipe-info to display the software images included in an .ipe file.
Syntax
display install ipe-info ipe-filename
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipe-filename: Specifies an .ipe file in the filesystemname/filename.ipe format. The file must be stored
in the root directory of a file system on the device. The value string excluding the file system location
section (if any) can have a maximum of 63 characters. For more information about specifying a file,
see file system management in Fundamentals Configuration Guide.
Examples
# Display information about .ipe file flash:/test.ipe.
<Sysname> display install ipe-info flash:/test.ipe
Verifying the file flash:/test.ipe on slot 1................Done.
HPE FF 5940 48XGT 6QSFP+ images in IPE:
boot.bin

HPE FlexFabric 5940 SERIES Specifications

General

Brand	HPE
Model	FlexFabric 5940 SERIES
Category	Switch
Language	English