226
subslot subslot-number: Specifies a subcard by its subslot number. If you do not specify a subcard,
this command does not display information about any subcards. This option is available only on the
HPE FlexFabric 5940 2-slot Switch (JH397A) and HPE FlexFabric 5940 4-slot Switch (JH398A).
verbose: Displays detailed hardware information. If you do not specify this keyword, this command
displays brief information.
Usage guidelines
If you do not specify the flash and usb keywords, this command displays information about member
devices.
Examples
# Display device information.
<Sysname> display device
Slot 1
Slot Type State Subslot Soft Ver Patch Ver
1 5940 2-slot Master 0 2504 None
Table 36 Command output
Field Description
Type Device type.
State
Role of the device in an IRF fabric:
• Master—The device is the master.
• Standby—The device is a subordinate member.
Soft Ver Software version of the device.
Patch Ver Patch version of the device. If no patch is installed, the value of this field is
None
.
display device manuinfo
Use display device manuinfo to display electronic label information for the device.
Syntax
display device manuinfo [ slot slot-number [ subslot subslot-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays electronic label information for all member devices.
subslot subslot-number: Specifies a subcard by its subslot number. If you do not specify a subcard,
this command does not display information about any subcards. This option is available only on the
HPE FlexFabric 5940 2-slot Switch (JH397A) and HPE FlexFabric 5940 4-slot Switch (JH398A).
Usage guidelines
An electronic label contains the permanent configuration information, including the hardware serial
number, manufacturing date, MAC address, and vendor name. The data is written to the storage
To Next Page
Loading...
Need help?
General