204
Updating from no package
to flash:/feature1-t0001015.bin.
The output shows that currently three image files are active but only two of them are confirmed.
Image file flash:/feature1-t0001015.bin is not confirmed yet.
<Sysname> install rollback to original
This operation might take several minutes, please wait...Done.
<Sysname> display install active
Active packages on slot 1:
flash:/boot-t0001015.bin
flash:/system-t0001015.bin
<Sysname> display install committed
Committed packages on slot 1:
flash:/boot-t0001015.bin
flash:/system-t0001015.bin
The output shows the SSH feature has been rolled back to the original software version. The image
file flash:/feature1-t0001015.bin has been removed.
Related commands
display install rollback
install verify
Use install verify to verify the software change commit status, image integrity, and image
consistency.
Syntax
install verify
Views
User view
Predefined user roles
network-admin
Usage guidelines
To ensure a successful ISSU and make sure that the system can start up and operate correctly after
an ISSU, execute this command to verify the following items:
• Integrity—Verify that the boot, system, and feature images are integral.
• Consistency—Verify that the same active images are running across the entire system.
• Software commit status—Verify that the active images are committed as needed.
If a software image fails the verification, perform the following tasks to resolve the problem:
• To ensure software integrity, download and install the software images again.
• To guarantee software image consistency or change software commit status, use the install
activate, install deactivate, and install commit commands as appropriate.
Examples
# Verify the software change confirmation status and software image integrity and consistency.
<Sysname> install verify
Active packages on slot 1 are the reference packages.
Packages will be compared with the reference packages.
This operation will take several minutes, please wait...
To Next Page
Loading...
Need help?
General