253
<Sysname> reset scheduler logfile
Related commands
display scheduler logfile
reset version-update-record
Use reset version-update-record to clear startup software image upgrade records.
Syntax
reset version-update-record
Views
System view
Predefined user roles
network-admin
Examples
# Clear the startup software image upgrade records.
<Sysname> system-view
[Sysname] reset version-update-record
This command will delete all records of version update. Continue? [Y/N]:y
Related commands
display version-update-record
restore factory-default
Use restore factory-default to restore the factory-default configuration for the device.
Syntax
restore factory-default
Views
User view
Predefined user roles
network-admin
Usage guidelines
This command is disruptive. Use this command only when you cannot troubleshoot the device by
using other methods, or you want to use the device in a different scenario.
Examples
# Restore the factory-default configuration for the device.
<Sysname> restore factory-default
This command will restore the system to the factory default configuration and clear the
operation data. Continue [Y/N]:y
Restoring the factory default configuration. This process might take a few minutes. Please
wait.................................................................................
.........................Done.
Please reboot the system to place the factory default configuration into effect.
To Next Page
Loading...
Need help?
General