HPE FlexFabric 5940 SERIES Fundamentals Command Reference

96
undo ftp server dscp
Default
IPv4 uses the DSCP value 0 for FTP packets sent to an FTP client.
Views
System view
Predefined user roles
network-admin
Parameters
dscp-value: Specifies a DSCP value in the range of 0 to 63.
Usage guidelines
The DSCP value is carried in the ToS field of an IP packet to indicate the transmission priority of the
packet.
Examples
# Set the DSCP value for IPv4 to use for outgoing FTP packets to 30 on an FTP server.
<Sysname> system-view
[Sysname] ftp server dscp 30
ftp server enable
Use ftp server enable to enable the FTP server.
Use undo ftp server enable to disable the FTP server.
Syntax
ftp server enable
undo ftp server enable
Default
The FTP server is disabled.
Views
System view
Predefined user roles
network-admin
Examples
# Enable the FTP server.
<Sysname> system-view
[Sysname] ftp server enable
ftp server ipv6 dscp
Use ftp server ipv6 dscp to set the DSCP value for IPv6 to use for FTP packets sent to an FTP
client.
Use undo ftp server ipv6 dscp to restore the default.
Syntax
ftp server ipv6 dscp dscp-value

HPE FlexFabric 5940 SERIES Specifications

General

Brand	HPE
Model	FlexFabric 5940 SERIES
Category	Switch
Language	English