HPE FlexFabric 5940 SERIES Fundamentals Command Reference

164
interface [ interface-type [ interface-number ] ]: Displays interface configuration, where the
interface-type argument represents the interface type and the interface-number argument
represents the interface number. If you do not specify the interface-type interface-number arguments,
the command displays the running configuration for all interfaces. If you specify only the
interface-type argument, the command displays the running configuration for all interfaces of this
type.
all: Displays all settings in the running configuration, including the default settings. If you do not
specify this keyword, the command displays only non-default settings in the running configuration.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify an IRF
member device, the command displays the running configuration for all IRF member devices.
Usage guidelines
Use this command to verify the configuration you have made.
If the system has automatically changed the setting you have made for a parameter, this command
displays the effective setting instead of the configured one. An automatic change typically occurs
because of system restrictions.
This command does not display parameters that are using the default settings if you do not specify
the all keyword.
Examples
# Display local user configuration.
<Sysname> display current-configuration configuration local-user
#
local-user ftp
password hash
$h$6$Twd73mLrN8O2vvD5$Cz1vgdpR4KoTiRQNE9pg33gU14Br2p1VguczLSVyJLO2huV5Syx/LfDIf8ROLtV
ErJ/C31oq2rFtmNuyZf4STw==
service-type ftp
authorization-attribute user-role network-operator
#
local-user root
password hash
$h$6$Twd73mLrN8O2vvD5$Cz1vgdpR4KoTiRQNE9pg33gU14Br2p1VguczLSVyJLO2huV5Syx/LfDIf8ROLtV
ErJ/C31oq2rFtmNuyZf4STw==
service-type ssh telnet terminal
authorization-attribute user-role network-admin
#
return
# Display VLAN interface configuration.
<Sysname> display current-configuration interface Vlan-interface
#
interface Vlan-interface1
ip address 192.168.1.84 255.255.255
#
Return
display current-configuration diff
Use display current-configuration diff to display the differences that the running configuration has
as compared with the next-startup configuration.

HPE FlexFabric 5940 SERIES Specifications

General

Brand	HPE
Model	FlexFabric 5940 SERIES
Category	Switch
Language	English