155
Configuration file management
commands
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more
information about FIPS mode, see Security Configuration Guide.
archive configuration
Use archive configuration to manually archive the running configuration to the configuration
archive directory.
Syntax
archive configuration
Views
User view
Predefined user roles
network-admin
Usage guidelines
This command saves the running configuration to the specified configuration archive directory with
file names generated from the specified name prefix.
Before executing this command, you must use the archive configuration location command to
specify a directory and a name prefix for the configuration archives.
In an IRF fabric, this command saves the running configuration only on the master device.
Examples
# Archive the running configuration.
<Sysname> archive configuration
Save the running configuration to an archive file. Continue? [Y/N]: Y
The archive configuration file myarchive_1.cfg is saved.
Related commands
archive configuration interval
archive configuration location
archive configuration max
display archive configuration
archive configuration interval
Use archive configuration interval to enable automatic running-configuration archiving and set the
archiving interval.
Use undo archive configuration interval to disable automatic running-configuration archiving.
Syntax
archive configuration interval interval
undo archive configuration interval
To Next Page
Loading...
Need help?
General