HPE FlexFabric 5940 SERIES Fundamentals Command Reference

80
speed
Use speed to set the transmission rate (also called the baud rate) on a user line.
Use undo speed to restore the default.
Syntax
speed speed-value
undo speed
Default
The transmission rate is 9600 bps on a user line.
Views
User line view
Predefined user roles
network-admin
Parameters
speed-value: Specifies the transmission rate in bps. The transmission rates for asynchronous serial
interfaces might include:
• 300 bps.
• 600 bps.
• 1200 bps.
• 2400 bps.
• 4800 bps.
• 9600 bps.
• 19200 bps.
• 38400 bps.
• 57600 bps.
• 115200 bps.
Usage guidelines
This command is not supported in VTY line view.
The configuration terminal and the device must be configured with the same transmission rate to
communicate.
Examples
# Set the transmission rate to 19200 bps for AUX line 0.
<Sysname> system-view
[Sysname] line aux 0
[Sysname-line-aux0] speed 19200
stopbits
Use stopbits to specify the number of stop bits for a character.
Use undo stopbits to restore the default.
Syntax
stopbits { 1 | 1.5 | 2 }

HPE FlexFabric 5940 SERIES Specifications

General

Brand	HPE
Model	FlexFabric 5940 SERIES
Category	Switch
Language	English