67
ip https ssl-server-policy
ip https port
Use ip https port to specify the HTTPS service port number.
Use undo ip https port to restore the default.
Syntax
ip https port port-number
undo ip https port
Default
The HTTPS service port number is 443.
Views
System view
Predefined user roles
network-admin
Parameters
port-number: Specifies a port number in the range of 1 to 65535.
Usage guidelines
When the HTTPS service is enabled, changing the HTTPS service port number re-enables the
HTTPS service and closes all HTTPS and HTTP connections. To log in again, users must enter the
new URL in the browser's address bar.
Examples
# Set the HTTPS service port number to 8080.
<Sysname> system-view
[Sysname] ip https port 8080
ip https ssl-server-policy
Use ip https ssl-server-policy to apply an SSL server policy to control HTTPS access.
Use undo ip https ssl-server-policy to restore the default.
Syntax
ip https ssl-server-policy policy-name
undo ip https ssl-server-policy
Default
No SSL server policy is applied. The HTTPS service uses a self-signed certificate.
Views
System view
Predefined user roles
network-admin
Parameters
policy-name: Specifies an SSL server policy name, a string of 1 to 31 characters.
To Next Page
Loading...
Need help?
General