HPE FlexFabric 5940 SERIES Fundamentals Command Reference

69
line class
Use line class to enter user line class view.
Syntax
line class { aux | vty }
Views
System view
Predefined user roles
network-admin
Parameters
aux: Specifies the AUX line class view.
vty: Specifies the VTY line class view.
Usage guidelines
To configure the same settings for all user lines of a line class, use this command to enter the user
line class view.
In user line class view, you can execute the following commands:
• activation-key
• auto-execute command
• authentication-mode
• command accounting
• command authorization
• escape-key
• history-command max-size
• idle-timeout
• protocol inbound
• screen-length
• set authentication password
• shell
• terminal type
• user-role
For commands that are available in both user line view and user line class view, the device uses the
following rules to determine the settings to use:
• A setting in user line view applies only to the user line. A setting in user line class view applies to
all user lines of the class.
• A non-default setting in either view takes precedence over a default setting in the other view. A
non-default setting in user line view takes precedence over a non-default setting in user line
class view.
• A setting in user line class view does not take effect for current online users. It takes effect only
for new login users.
Examples
# Set the CLI connection idle-timeout timer to 15 minutes in VTY line class view.
<Sysname> system-view
[Sysname] line class vty

HPE FlexFabric 5940 SERIES Specifications

General

Brand	HPE
Model	FlexFabric 5940 SERIES
Category	Switch
Language	English