147
Examples
# Mount a file system on the USB disk.
<Sysname> mount usba0:
Related commands
umount
move
Use move to move a file.
Syntax
move source-file { dest-file | dest-directory }
Views
User view
Predefined user roles
network-admin
Parameters
source-file: Specifies the name of the source file.
dest-file: Specifies the name of the destination file.
dest-directory: Specifies the name of the destination directory.
Usage guidelines
If you specify a destination directory, the system moves the source file to the specified directory
without changing the file name.
Examples
# Move the flash:/test/sample.txt file to flash:/, and save it as 1.txt.
<Sysname> move test/sample.txt 1.txt
Move flash:/test/sample.txt to flash:/1.txt? [Y/N]:y
Moving file flash:/test/sample.txt to flash:/1.txt ...Done.
# Move the b.cfg file to the test2 directory.
<Sysname> move b.cfg test2
Move flash:/b.cfg to flash:/test2/b.cfg? [Y/N]:y
Moving file flash:/b.cfg to flash:/test2/b.cfg... Done.
pwd
Use pwd to display the working directory.
Syntax
pwd
Views
User view
Predefined user roles
network-admin
To Next Page
Loading...
Need help?
General