133
Views
System view
Predefined user roles
network-admin
Parameters
acl-number: Specifies the number of a basic ACL, in the range of 2000 to 2999.
Usage guidelines
You can use an ACL to deny or permit the device's access to specific TFTP servers.
Examples
# Allow the device to access only TFTP server 1.1.1.1.
<Sysname> system-view
[Sysname] acl basic 2000
[Sysname-acl-ipv4-basic-2000] rule permit source 1.1.1.1 0
[Sysname-acl-ipv4-basic-2000] quit
[Sysname] tftp-server acl 2000
tftp-server ipv6 acl
Use tftp-server ipv6 acl to use an ACL to control the device's access to TFTP servers in an IPv6
network.
Use undo tftp-server ipv6 acl to restore the default.
Syntax
tftp-server ipv6 acl ipv6-acl-number
undo tftp-server ipv6 acl
Default
No ACL is used to control the device's access to TFTP servers.
Views
System view
Predefined user roles
network-admin
Parameters
ipv6-acl-number: Specifies the number of a basic ACL, in the range of 2000 to 2999.
Usage guidelines
You can use an ACL to deny or permit the device's access to specific TFTP servers.
Examples
# Allow the device to access only TFTP server 2001::1.
<Sysname> System-view
[Sysname] acl ipv6 basic 2001
[Sysname-acl-ipv6-basic-2001] rule permit source 2001::1/128
[Sysname-acl-ipv6-basic-2001] quit
[Sysname] tftp-server ipv6 acl 2001
To Next Page
Loading...
Need help?
General