248
Syntax
memory-threshold [ slot slot-number [ cpu cpu-number ] ] usage memory-threshold
undo memory-threshold [ slot slot-number [ cpu cpu-number ] ] usage
Default
The memory usage threshold is 100%.
Views
System view
Predefined user roles
network-admin
Parameters
memory-threshold: Specifies the memory usage threshold in percentage. The value range is 0 to
100.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command sets the memory usage threshold for the master device.
cpu cpu-number: Specifies a CPU by its number.
Usage guidelines
The device samples memory usage at an interval of 1 minute. If the sample is greater than the
memory usage threshold, the device sends a trap.
Examples
# Set the memory usage threshold to 80%.
<Sysname> system-view
[Sysname] memory-threshold usage 80
Related commands
display memory-threshold
monitor cpu-usage enable
Use monitor cpu-usage enable to enable CPU usage monitoring.
Use undo monitor cpu-usage enable to disable CPU usage monitoring.
Syntax
monitor cpu-usage enable [ slot slot-number [ cpu cpu-number ] ]
undo monitor cpu-usage enable [ slot slot-number [ cpu cpu-number ] ]
Default
CPU usage monitoring is enabled.
Views
System view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command enables CPU usage monitoring for the master device.
To Next Page
Loading...
Need help?
General