111
Examples
# Download the a.txt file and save it as b.txt in the working directory accessed by the ftp command.
ftp> get a.txt b.txt
local: b.txt remote: a.txt
150 Connecting to port 47457
226 File successfully transferred
1569 bytes received in 0.00527 seconds (290.6 kbyte/s)
# Download the a.txt file to the test directory in the working directory accessed by the ftp command.
ftp> get a.txt flash:/test/b.txt
local: flash:/test/b.txt remote: a.txt
150 Connecting to port 47457
226 File successfully transferred
1569 bytes received in 0.00527 seconds (290.6 kbyte/s)
# Download the a.txt file to the root directory of the flash memory on a member device. Save the file
as c.txt.
ftp> get a.txt slot1#flash:/c.txt
local: slot1#flash:/c.txt remote: a.txt
150 Connecting to port 47460
226 File successfully transferred
1569 bytes received in 0.0564 seconds (27.2 kbyte/s)
Related commands
put
help
Use help to display all commands supported by the FTP client.
Use help command-name to display the help information for a command.
Syntax
help [ command-name ]
Views
FTP client view
Predefined user roles
network-admin
Parameters
command-name: Specifies a command supported by the FTP client.
Usage guidelines
In FTP client view, executing the help command is the same as entering ?.
Examples
# Display all commands supported by the FTP client.
ftp> help
append delete ls quit rmdir
ascii debug mkdir reget status
binary dir newer rstatus system
To Next Page
Loading...
