191
file filename: Specifies a file in the filename.extension format, a case-insensitive string of up to 63
characters. It cannot contain path information.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information for all IRF members.
Usage guidelines
A component is a collection of features. The features of a component are installed or uninstalled at
the same time.
When the system displays a component or file error, use this command to identify the image files that
include the component or file. Then, you can use the install verify command to identify image file
problems.
This command searches only the root directories of the file systems at the specified location.
Examples
# Display the software image file that includes pkg_ctr.
<Sysname> display install which file pkg_ctr
Verifying the file flash:/system-t0001015.bin on slot 1..........................Done.
Found pkg_ctr in flash:/system-t0001015.bin on slot 1.
flash:/system-t0001015.bin
[Package]
Vendor: HPE
Product: 5940
Service name: system
Platform version: 7.1.070
Product version: Test 0001015
Supported board: mpu
Verifying the file flash:/boot-d2601007.bin on slot 1.....Done.
Table 28 Command output
Field Description
Verifying the file The system was verifying the validity of the file.
[Package] Detailed information about the software image.
Service name
Image type:
• boot—Boot image.
• system—System image.
• patch—Patch image.
• Any other value indicates a feature image.
Supported board
Hardware types supported by the software image:
mpu
—Member device.
display issu rollback-timer
Use display issu rollback-timer to display automatic rollback timer information.
Syntax
display issu rollback-timer
To Next Page
Loading...
Need help?
General