207
Verifying the file flash:/feature1.bin on slot 1..............Done.
Copying file flash:/feature1.bin to slot1#flash:/feature1.bin...Done.
Upgrade summary according to following table:
flash:/feature1.bin
Running Version New Version
Test 0001015 Test 0001016
Slot Upgrade Way
1 Service Upgrade
Upgrading software images to compatible versions. Continue? [Y/N]:y
This operation might take several minutes, please wait...Done.
For information about the command output, see Table 30.
Related commands
issu accept
issu load
issu run switchover
issu load
Use issu load to upgrade the software images of subordinate members and configure the new
images as main startup software images for those members.
Syntax
issu load file { boot filename | system filename | feature filename&<1-30> } * slot
slot-number&<1-9> [ reboot ]
issu load file ipe ipe-filename slot slot-number&<1-9> [ reboot ]
Views
User view
Predefined user roles
network-admin
Parameters
boot: Specifies a boot image file.
system: Specifies a system image file.
feature: Specifies a space-separated list of up to 30 feature image files.
filename: Specifies a .bin file in the filesystemname/filename.bin format. The file must be stored in
the root directory of a file system on the master device. The value string excluding the file system
location section (if any) can have a maximum of 63 characters. For more information about
specifying a file, see file system management in Fundamentals Configuration Guide.
ipe-filename: Specifies an .ipe file in the filesystemname/filename.ipe format. The file must be stored
in the root directory of a file system on the master device. The value string excluding the file system
location section (if any) can have a maximum of 63 characters. For more information about
specifying a file, see file system management in Fundamentals Configuration Guide.
slot slot-number: Specifies the member ID of a subordinate member. You can specify a
space-separated list of up to nine member IDs. On a single-chassis IRF fabric, enter the member ID
of the member device to upgrade the entire fabric. On a multichassis IRF fabric, you can specify only
To Next Page
Loading...
Need help?
General