HPE FlexFabric 5940 SERIES Fundamentals Command Reference

103
257 "/ftp/subdir" is your current location
ftp> cdup
250 OK. Current directory is /ftp
ftp> pwd
257 "/ftp" is your current location
Related commands
cd
pwd
close
Use close to terminate the connection to the FTP server without exiting FTP client view.
Syntax
close
Views
FTP client view
Predefined user roles
network-admin
Usage guidelines
You can perform this operation only after you log in to the FTP server.
Examples
# Terminate the connection to the FTP server without exiting the FTP client view.
ftp> close
221-Goodbye. You uploaded 0 and downloaded 0 kbytes.
221 Logout.
ftp>
Related commands
disconnect
debug
Use debug to enable or disable FTP client debugging.
Syntax
debug
Default
FTP client debugging is disabled.
Views
FTP client view
Predefined user roles
network-admin
Usage guidelines
When FTP client debugging is enabled, executing this command disables FTP client debugging.

HPE FlexFabric 5940 SERIES Specifications

General

Brand	HPE
Model	FlexFabric 5940 SERIES
Category	Switch
Language	English