EasyManua.ls Logo

HPE FlexFabric 5940 SERIES

HPE FlexFabric 5940 SERIES
289 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
179
Copying main startup software images to slot 1. Please wait...
Done.
Setting copied images as main startup software images for slot 1...
Done.
Successfully updated the startup software images of slot 1.
Related commands
display boot-loader
install commit
bootrom update
Use bootrom update to load the BootWare image on the default file system to the Normal area of
BootWare.
Syntax
bootrom update file file slot slot-number-list [ subslot subslot-number-list ]
Views
User view
Predefined user roles
network-admin
Parameters
file file: Specifies the file that contains the BootWare image. The file argument represents the file
name, a string of 1 to 63 characters.
slot slot-number-list: Specifies a space-separated list of up to seven slot number items. An item
specifies an IRF member device by its member ID or a range of IRF member devices in the form of
start-slot-number to end-slot-number. The end slot number must be equal to or greater than the start
slot number.
subslot subslot-number-list: Specifies a list of up to seven subslot number items. Each item
specifies a subcard by its subslot number or a range of subcards in the form of start-subslot-number
to end-subslot-number. If you do not specify a subcard, this command loads the BootWare image for
the base card.
Usage guidelines
BootWare images are contained in the .bin Comware boot image file. You can specify a Comware
boot image file in this command to upgrade the BootWares in the system before you upgrade the
Comware images. If you do not upgrade BootWares before upgrading Comware images, the system
automatically upgrades BootWares as necessary when loading Comware images.
The new BootWare images take effect after you reboot the device.
Examples
# Use the file a.bin in the root directory of the flash memory to upgrade the BootWare image.
<Sysname> bootrom update file flash:/a.bin slot 1
This command will update the Boot ROM file on the specified board(s), Continue? [Y/N]:y
Now updating the Boot ROM, please wait................Done.
Related commands
boot-loader file

Table of Contents

Other manuals for HPE FlexFabric 5940 SERIES

Related product manuals