201
install commit
Use install commit to commit software changes.
Syntax
install commit
Views
User view
Predefined user roles
network-admin
Usage guidelines
This command modifies the main startup software image list to be the same as the current software
image list.
You must execute this command after using the following commands:
• The install activate command in an incremental upgrade.
• The install deactivate command.
• The install rollback command.
In a reboot upgrade, the install activate command modifies both the current and startup software
image lists. You do not need to commit software changes.
Both the install commit and boot-loader file commands modify the main startup software image
list. To modify the backup startup image list or add inactive images as main startup images, however,
you must use the boot-loader file command.
For more information about main and backup startup software images, see Fundamental
Configuration Guide.
Examples
# Commit software changes.
<Sysname> install commit
This operation will take several minutes, please wait...........................Done.
Related commands
install activate
install deactivate
install rollback
install deactivate
Use install deactivate to deactivate feature images and patch images.
Syntax
install deactivate feature filename&<1-30> slot slot-number
install deactivate patch filename&<1-30> { all | slot slot-number }
Views
User view
Predefined user roles
network-admin
To Next Page
Loading...
Need help?
General