249
cpu cpu-number: Specifies a CPU by its number.
Usage guidelines
After CPU usage monitoring is enabled, the system samples and saves CPU usage at the interval
specified by the monitor cpu-usage interval command. You can use the display cpu-usage
history command to view recent CPU usage.
Examples
# Enable CPU usage monitoring.
<Sysname> system-view
[Sysname] monitor cpu-usage enable
Related commands
display cpu-usage configuration
display cpu-usage history
monitor cpu-usage interval
monitor cpu-usage interval
Use monitor cpu-usage interval to set the sampling interval for CPU usage monitoring.
Syntax
monitor cpu-usage interval interval [ slot slot-number [ cpu cpu-number ] ]
Default
The system samples CPU usage every 1 minute.
Views
System view
Predefined user roles
network-admin
Parameters
interval: Specifies the sampling interval for CPU usage monitoring. Valid values include 5Sec for 5
seconds, 1Min for 1 minute, and 5Min for 5 minutes. The values are case insensitive.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command sets the interval for the master device.
cpu cpu-number: Specifies a CPU by its number.
Usage guidelines
After CPU usage monitoring is enabled, the system samples and saves CPU usage at the specified
interval. You can use the display cpu-usage history command to view recent CPU usage.
Examples
# Set the sampling interval for CPU usage monitoring to 5 seconds.
<Sysname> system-view
[Sysname] monitor cpu-usage interval 5Sec
Related commands
display cpu-usage configuration
display cpu-usage history
monitor cpu-usage enable
To Next Page
Loading...
Need help?
General