256
For data security, the system does not reboot at the reboot time if a file operation is being performed.
Examples
# Configure the device to reboot at 12:00 p.m. This example assumes that the current time is 11:43
a.m. on June 6, 2015.
<Sysname> scheduler reboot at 12:00
Reboot system at 12:00:00 06/06/2015 (in 0 hours and 16 minutes). Confirm? [Y/N]:
Related commands
scheduler reboot delay
scheduler reboot delay
Use scheduler reboot delay to specify the reboot delay time.
Use undo scheduler reboot to delete the reboot schedule configuration.
Syntax
scheduler reboot delay time
undo scheduler reboot
Default
No reboot delay time is specified.
Views
User view
Predefined user roles
network-admin
Parameters
time: Specifies the reboot delay time in the hh:mm or mm format. This argument can contain up to six
characters. When in the hh:mm format, mm must be in the range of 0 to 59.
Usage guidelines
CAUTION:
Device reboot interrupts network services.
The device supports only one device reboot schedule. If you execute both the scheduler reboot
delay and schedule reboot at commands or execute one of the commands multiple times, the most
recent configuration takes effect.
For data security, the system does not reboot at the reboot time if a file operation is being performed.
Examples
# Configure the device to reboot after 88 minutes. This example assumes that the current time is
11:48 a.m. on June 6, 2015.
<Sysname> scheduler reboot delay 88
Reboot system at 13:16 06/06/2015(in 1 hours and 28 minutes). Confirm? [Y/N]:
scheduler schedule
Use scheduler schedule to create a schedule and enter its view, or enter the view of an existing
schedule.
To Next Page
Loading...
