192
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
Change to the automatic rollback interval does not take effect on the ongoing ISSU process. The
current remaining rollback time might be greater than the specified automatic rollback interval.
Examples
# Display automatic rollback timer information after the issu run switchover command is executed.
<Sysname> display issu rollback-timer
Rollback timer: Working
Rollback interval: 45 minutes
Rollback time remaining : 40 minutes
# Display automatic rollback timer information after the issu accept command is executed.
<Sysname> display issu rollback-timer
Rollback timer: Not working
Rollback interval: 30 minutes
# Display automatic rollback timer information when no ISSU process is taking place.
<Sysname> display issu rollback-timer
Rollback timer: Not working
Rollback interval: 45 minutes
Related commands
issu rollback-timer
display issu state
Use display issu state to display ISSU status information.
Syntax
display issu state
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
During an ISSU that uses issu commands, you can use this command to verify the ISSU status and
determine what to do next.
This command does not apply to an ISSU that uses install commands, because the ISSU state
machine is not involved.
Examples
# Display ISSU status information when no upgrade is taking place.
<Sysname> display issu state
To Next Page
Loading...
